Billiard accessories

kas notur kiju taisni, kamēr līmē vai žāvē jaunu uzgali (parasti līmējamos tipa uzgaļus).

Lietojums:

kad uz kijas līmē jaunu uzgali

lai stingri piespiestu

žūšanas laikā novērstu šķību ielīmēšanu

Šī ir ļoti tipiska amatieru darbnīcas skava, ko bieži tirgoja BCE un Riley.

">

On the left — brass ferrule + cue tips

The label says:

“1 x Brass Ferrule” – brass ferrule (sleeve that goes on the end of the cue shaft).

“3 x Screw Tips 11 mm” – three screw-on cue tips, 11 mm in diameter.

Usage:
This set is intended for cue tip restoration – screw-on tips are screwed onto the ferrule. A cheaper, amateur-grade option, very popular in the 1990s–2000s.

---

2) On the right — Cue Clamp

Label: “Cue Clamp”
It is a practical plastic clamp that holds the cue straight while gluing or drying a new tip (usually glue-on type tips).

Usage:

when gluing a new tip onto the cue

to press firmly

to prevent crooked insertion during drying

This is a very typical amateur workshop clamp, often sold by BCE and Riley.